Bollegraaf HBK60 (30kW) shear baler Bollegraaf HBC60
Specifications
Machine
| Type | Bollegraaf HBC60 |
| Power | 30kW |
| Year | 2023 |
| Hours | 0 |
| Condition | New |
Bale dimensions
| Weight | |
| Length | |
| Height | |
| Width |
Motor
| Output | |
| Twistomat | |
| Counter pressure pump | |
| Needle installation | |
| Oil cooler fan | |
| Pump for oil cooling | |
| Operating pressure |
Max capacity
| Volume mg/hour | |
| Weight kg/m3 | |
| Weight t/hour |
Highlights
Additional information
https://www.machineseeker.nl/bollegraaf-hbk60+%2830kw%29/i-12165476
Bollegraaf Recycling Solutions, the original manufacturer of this NEW shear baler, hereby offers the following machine(s)
Baler, HBK60 (30kW);
* Includes pusher cilinder
* Including 2 extra large access doors on the sides of the
press
* Includes bolt-on Hardox wear plates
Warranty on new machines
2 years, but not exceeding 4000 operating hours, for defects in materials and/or design of new goods, provided that the machines are correctly operated in accordance with the user manual (including the maintenance instructions specified therein). Wear parts, adjustment and adjustment errors and faulty maintenance are excluded.
The baler is equipped with the following accessories:
Pusher cilinder
During tie-off, the pusher cilinder releases jammed material from the cutting blade, exposing the blade block again.
2 extra large access doors on the side of the press
Middle hopper
Middle hopper with 1 set of photocells for filling the precompression valve.
Bale outlet with closed bottom
The bale exit is attached to the end of the bale channel to guide the bales to the ground.
Wire roll platform horizontal wires for (4 wire rolls)
Wire roll platform horizontal wires at the back (4 wire rolls)
Hardox bolt-on wear plates
The press is equipped with Hardox wear plates. The high wear resistance of the Hardox ensures a longer life of the press.
Bale length display
Wiring with protection against rats
Cable coding
Control cable with numbered wires
Oil heating
Remote support
Control cabinet heater
Electrical system
• The electrical system is equipped with Siemens components.
Colour
The machine is supplied in RAL 6024 (traffic green).
Bollegraaf Recycling Solutions, the original manufacturer of this NEW shear baler, hereby offers the following machine(s)
Baler, HBK60 (30kW);
* Includes pusher cilinder
* Including 2 extra large access doors on the sides of the
press
* Includes bolt-on Hardox wear plates
Warranty on new machines
2 years, but not exceeding 4000 operating hours, for defects in materials and/or design of new goods, provided that the machines are correctly operated in accordance with the user manual (including the maintenance instructions specified therein). Wear parts, adjustment and adjustment errors and faulty maintenance are excluded.
The baler is equipped with the following accessories:
Pusher cilinder
During tie-off, the pusher cilinder releases jammed material from the cutting blade, exposing the blade block again.
2 extra large access doors on the side of the press
Middle hopper
Middle hopper with 1 set of photocells for filling the precompression valve.
Bale outlet with closed bottom
The bale exit is attached to the end of the bale channel to guide the bales to the ground.
Wire roll platform horizontal wires for (4 wire rolls)
Wire roll platform horizontal wires at the back (4 wire rolls)
Hardox bolt-on wear plates
The press is equipped with Hardox wear plates. The high wear resistance of the Hardox ensures a longer life of the press.
Bale length display
Wiring with protection against rats
Cable coding
Control cable with numbered wires
Oil heating
Remote support
Control cabinet heater
Electrical system
• The electrical system is equipped with Siemens components.
Colour
The machine is supplied in RAL 6024 (traffic green).