Fully refurbished pre press horizontal baler HBC120K (90kW) crosswires 2011 Bollegraaf HBC120
Specifications
Machine
| Type | Bollegraaf HBC120 |
| Power | 90kW |
| Year | 2011 (refurbished in 2023) |
| Hours | 0 |
| Condition | Fully refurbished including 2 yr warranty |
Bale dimensions
| Weight | |
| Length | |
| Height | |
| Width |
Motor
| Output | |
| Twistomat | |
| Counter pressure pump | |
| Needle installation | |
| Oil cooler fan | |
| Pump for oil cooling | |
| Operating pressure |
Max capacity
| Volume mg/hour | |
| Weight kg/m3 | |
| Weight t/hour |
Highlights
Additional information
https://www.machineseeker.nl/customer/listing/index?listingId=7930856
Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler.
Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation.
Technical data baler
Typ HBC 120 K
Year of construction 2011
Press power main press 120 tons
Press power of pre-press 70 tons
Feed channel 1,600 x 1,100 mm
Bale size 1,100 x 720 mm
Driving motor 90 kW
Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation.
The refurbishment process is done to our very strict OEM refurbishment guidelines.
Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler.
Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation.
Technical data baler
Typ HBC 120 K
Year of construction 2011
Press power main press 120 tons
Press power of pre-press 70 tons
Feed channel 1,600 x 1,100 mm
Bale size 1,100 x 720 mm
Driving motor 90 kW
Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation.
The refurbishment process is done to our very strict OEM refurbishment guidelines.
Bollegraaf OEM Factory-Certified Refurbished Balers:
Only Bollegraaf can guarantee that a reconditioned baler is built according to factory standards.
At our location in Appingedam we have a special overhaul workshop where we overhaul used balers.
When you purchase a Bollegraaf OEM Factory-Certified Refurbished Baler, you can be sure the baler has been fully inspected and is as good as new.
Remanufactured or used Bollegraaf balers from other companies do not undergo the same rigorous inspection and reconstruction.
General principles overhaul
Cleaning and disassembly
The baler is completely cleaned and dismantled in our overhaul workshop.
Tolerances
The tolerances of all steel components are measured and where necessary welded again.
At least this applies to;
- Ram,
- Frame,
- Channel,
- Pre-press flap
The ram is re-welded and fitted with new ram wheels.
The protective grids and the pre-pressure flap are made dent-free and repaired where necessary.
Repainted
After measuring the tolerances and any repair and welding work, all components are repainted.
Hydraulics:
The hydraulic tank is cleaned.
The hydraulic lines & hoses are replaced.
The hydraulic components are repackaged.
The hydraulic oil is replaced.
Cabling:
All cabling is checked and replaced if necessary.
All junction boxes are replaced and placed back in easily accessible positions.
Wear parts:
All wear parts are replaced.
The pins and shafts of the cylinders and the channel are replaced with new ones.
All wearing parts of the (both) needle installations and knots are replaced by new ones.
Cylinders:
The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod.
Control box
The switch box is checked and cleaned.
If necessary, electronic components are replaced with new ones.